F-One Hydrofoil Fuselages

665.00 lei1,665.00 lei cu TVA

Fuselages for the F-One hydrofoils of 2020:

  • Alu fuselage 60 for the F-One IC6 850 V.2 Hydrofoil
  • Titan fuselage 60 Kite for the F-One ESCAPE Hydrofoil
  • Titan fuselage 60 Kite for the F-One MIRAGE Hydrofoil
  • Fuselage Tail Carbon L/S for the F-One GRAVITY Hydrofoil
Clear
SKU: HFTF- Category: Tags: , , , , , , , ,

Description

The F-One Hydrofoil Alu Fuselage 60, Titan Fuselage 60 Kite & Fuselage Tail Carbon L / S

 

Alu Fuselage 60

The Alu fuselage 60 is a fuselage that connectes directly to F-One aluminium masts. It is made of aluminium 6061, CNC machined with high precision and fully anodized. To connect the Alu Fuselage 60 to the mast, insert the three struts into the mast and fasten using two M6x25mm tapered head screws.

At the forward end, this fuselage can accept all wings of any size with FCD connectors. Once it is plugged in, the front wing must be fastened with a 210mm main rod. A stabilizer can be fastened at the back using two M6x16mm tapered head screws . The craddle for the stabilizer was designed to keep the foil in trim when using F-One stabilizers.

Titan Fuselage 60 Kite

The TITAN fuselage 60 is a fuselage that connectes to F-One aluminium or carbon masts via a TITAN connection. It is made of aluminium 6061, CNC machined with high precision and fully anodized. The TITAN fuselage 60 must be fasten to the mast or mast foot using three M6x25mm tapered head screws.

At the forward end, this fuselage can accept all wings of any size with FCD connectors. Once it is plugged in, the front wing must be fastened with 210mm main rod. A stabilizer can be fastened at the back using two M6x16mm tapered head screws . The craddle for the stabilizer was designed to keep the foil in trim when using F-One stabilizers.

Fuselage Tail Carbon L / S

The Fuselage Tail Carbon is an essential complement to the F-One Monobloc carbon wings.

They connect with the front wing behind the TITAN mast slot in an area where the loads are reduced. Still, the shape of the connection is inspired from the TITAN design and offers a very robust and stiff assembly.

At the back the cradle for the stabilizer is designed with the right angle to make the front wing fly with ease and efficiency.

The Fuselage Tail Carbon are built in pre-preg carbon with a foam core to keep their weight extremely light. Some solidly anchored brass inserts are used for all fastenings.

The Fuselage Tail Carbon are available in three sizes:

  • Short (37 cm): offers more maneuverability and reactivity – recommended with Gravity 1200/1400
  • Long (41 cm): offers more stability and a more efficient pumping – recommended with Gravity 1800
  • Wide (37 cm): designed with a larger section to withstand higher loads – recommended with Levo Carbon 900

Size

ModelLengthWeight
Alu Fuselage 6060 cm0.78 kg
Titan Fuselage 60 Kite60 cm0.61 kg
Fuselage Tail Carbon L37 cm (Short)
41 cm (Long)
37 cm (Wide)
0.170 kg
Fuselage Tail Carbon S37 cm (Short)
41 cm (Long)
37 cm (Wide)
0.710 kg

Technology

Alu masts 45 > 85 cm
The F-ONE aluminium mast can be used for all disciplines, kite, surf, sup and windsurf.

prorider shop FOne Hydrofoil Masts Alu 1

The profile is extruded with precision from 6063 aluminium block. The shape of its section benefits from our years of experience in kitefoiling to provide the best gliding feel while keeping the strength up and the weight down. It comes with two stainless steel helicoil inserts at the bottom and at the top to fasten the connecting parts and is therefore fully modular. The aluminium mast can be used on every foil of the range and it is very easy to jump from one length to another. A number of parts are available for board connection (Plate, KF, Deep KF, Tuttle).
Carbon masts 85 > 105 cm
The F-ONE Carbon masts provide amazing speed potential with top precision in all conditions.

Equipped with a built-in TITAN mast foot, the carbon masts are compatible with all TITAN fuselage our Wings. Available in 65cm length with tuttle head and lighter layup or in 85cm, 95cm and 105 with stiffer layup including some high modulus carbon and a deep tuttle head.

Section thickness: 12mm (bottom) / 13.5mm (top)
Section chord: 110mm (bottom) / 135mm (top)

Prorider shop FOne Hydrofoil Masts Carbon 1

With their high-performance profile evolving from 1.2 cm thick at the bottom to 1.35 cm at the top, these masts deliver an impressive feeling of glide and top of the range performance. The intricate profile and chord length prevent turbulence and make them very secure and stable at speed. Their elaborate carbon PRE-PREG one-shot molding construction makes sure these masts meet the required demand on torsion and bending stiffness to keep the control of the foil at any moment and especially when pushing hard.
Stab C300
Versatile and progressive, the C300 stabilizer can be combined with any front wings and fits a very large range of practices.

Prorider shop FOne Hydrofoil Cc 300 Stab

Equipped with generous winglets, the stabilizer blade offers fantastic control with enough surface area to provide full confidence in all situations.
Built in Carbon Composite and designed to be securely mounted on F-ONE fuselages, its profile and angle of incidence were tuned to achieve a very intuitive balance which will help you get your foiling maneuvers in more easily.
Titan fuselage 60 Kite
The TITAN fuselage 60 is a fuselage that connectes to F-ONE aluminium or carbon masts via a TITAN connection.

Length: 60cm
Weight: 0.61 kg

Prorider shop FOne Hydrofoil Fuselage Titan 60

It is made of aluminium 6061, CNC machined with high precision and fully anodized. The TITAN fuselage 60 must be fasten to the mast or mast foot using three M6x25mm tapered head screws.
At the forward end, this fuselage can accept all wings of any size with FCD connectors. Once it is plugged in, the front wing must be fastened with 210mm main rod. A stabilizer can be fastened at the back using two M6x16mm tapered head screws . The craddle for the stabilizer was designed to keep the foil in trim when using F-ONE stabilizers.
Titan mast foot
The TITAN mast foot is the connecting part that makes the F-ONE aluminium masts compatible with all TITAN fuselages and wings.

Prorider shop FOne Hydrofoil Sp Titan Mast Foot

It is made of 6061 aluminium, CNC machined with high precision and fully anodized. To install the TITAN mast foot, it should be inserted into the bottom end of the aluminium mast and fastened with two M6x25mm tapered head screws.
Titan connection
The TITAN connection enables a very stiff and direct connection between two parts, locking efficiently any movement in all directions.

Prorider shop FOne Hydrofoil Titan Connection

Its format is compact which is hydrodynamically friendly and very easy to use, assemble and disassemble.
6063 6061 ALUMINIUM
Aluminium parts are integral to our foils. Except for the mast which is extruded, all parts are CNC machined with a precision down to 0,2mm.

Prorider shop FOne Hydrofoil Focus Titan Connection 2018

Machining blocks of aluminium 6061 guarantees the maximum accuracy and preserves the mechanical properties of this higher grade of aluminium. All parts are fully anodized and stainless steel inserts are fitted with isolating gel when fastening is required.
FCD
We have patented the FCD assembly concept because this is a critical aspect of the kitefoil. It drives the reliability and ease of use for assembling and taking the foil apart for transportation, as much as the repeatability of the trim between the front and rear wings.

The main benefit of the system lies in the main screw that maintains the front wing with the rest of the foil. This screw is placed longitudinally and is therefore only stressed in tension instead of shear or bending. The whole foil can be tightened up with everything working in a sound mechanical way.

To gain some precision, robustness and packed-up volume, the screw is combined with a squared, conical assembling system, which has been proven as the best mechanical setup to lock any motion or degree of freedom between the parts, while also contributing greatly to tensional resistance.
Pre-preg
With Pre-preg fabrics, the carbon fiber is directly impregnated with epoxy resin by its manufacturer; this guarantees a perfect ratio between epoxy and carbon, and represents the highest quality process. The material is stored in cooled rooms and catalyzes at 120° C in a mold.


The Pre-preg fibers must travel in refrigerated trucks and be stored frozen. The refined ratio between carbon fiber and epoxy resin provides the lightest weight with the best mechanical properties of carbon fiber.

 

Additional information

Brand

F-One

Model

Alu fuselage 60, Titan fuselage 60 Kite, Fuselage Tail Carbon – Short, Fuselage Tail Carbon – Long